5. In the Select Network Component Type dialog box, select Protocol, and then click Add…
6. Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click OK.
You may be prompted to install files from your Windows 2000 installation CD or other media.
Follow the instructions to install the files.
7. If prompted, click OK to restart your computer with the new settings.
Next, configure the PCs to accept IP information assigned by the Wireless Gateway:
8. In the Control Panel, double-click the Network and Dial-up Connections icon.
9. In the Network and Dial-up Connections window, right-click the Local Area Connection icon,
and then select Properties.
10. In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP), and
then click Properties.
11. In the Internet Protocol (TCP/IP) Properties dialog box, click the radio button labeled Obtain
an IP address automatically. Also click the radio button labeled Obtain DNS server address
automatically.
12. Click OK twice to confirm and save your changes, and then close the Control Panel.
Windows Me PCs
1. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel.
2. Double-click the Network and Dial-up Connections icon.
3. In the Network and Dial-up Connections window, right-click the Network icon, and then select
Properties.
The Network Properties dialog box displays with a list of currently installed network
components. If the list includes Internet Protocol (TCP/IP), then the protocol has already
been enabled. Skip to step 11.
4. If Internet Protocol (TCP/IP) does not display as an installed component, click Add…
5. In the Select Network Component Type dialog box, select Protocol, and then click Add…
6. Select Microsoft in the Manufacturers box.
7. Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click OK.
You may be prompted to install files from your Windows Me installation CD or other media.
Follow the instructions to install the files.
8. If prompted, click OK to restart your computer with the new settings.
Next, configure the PCs to accept IP information assigned by the Wireless Gateway:
9. In the Control Panel, double-click the Network and Dial-up Connections icon.
10. In Network and Dial-up Connections window, right-click the Network icon, and then select
Properties.
11. In the Network Properties dialog box, select TCP/IP, and then click Properties.
12. In the TCP/IP Settings dialog box, click the radio button labeled Server assigned IP address.
Also click the radio button labeled Server assigned name server address.
13. Click OK twice to confirm and save your changes, and then close the Control Panel.
Windows 95, 98 PCs
First, check for the IP protocol and, if necessary, install it:
1. In the Windows task bar, click the Start button, point to Settings, and then click Control Panel.
2. Double-click the Network icon.
The Network dialog box displays with a list of currently installed network components. If the
list includes TCP/IP, and then the protocol has already been enabled. Skip to step 9.
3. If TCP/IP does not display as an installed component, click Add…
The Select Network Component Type dialog box displays.
4. Select Protocol, and then click Add…
To Next Page
Loading...
