LevelOne WRE-6001 - 13 Backup;Restore Settings; Save Settings to File

44
13 Backup/Restore Settings
This page allows you save current settings to a file or reload the settings from the file
which was saved previously.
Besides, you could reset the current configuration to factory default.
If you do make changes to the default configuration but then wish to revert back to the
original factory configuration, you can do so by resetting the device to factory defaults.
Save Settings to File
It allows you save current settings to a file.
1. From the Maintenance -> Backup/Restore menu. The following page is displayed:
Figure 5: Reset to Defaults page
Option
Description
Save Settings
to File
Save the Settings to a File
Load Settings
from File
Load Settings from a File
2. Click on Save….