Leviton VRCPG - System Setup; Network; Include Node; Exclude Node

Selecting 1. Network from the ADVANCED screen
will bring you to the NETWORK screen.
x1
Back
ADVANCED
Home
8:35A
1. Network
2. Association
3. RS232 Setup
4. RTS Devices
5. Utilities
x1
Back
NETWORK
2. Exclude Node
3.
Ntwk Rediscovery
4. Update Controller
5. Remove Failed
Home
8:35A
1. Include Node
x1
Back
NETWORK
5. Remove Failed
6.
Join as Secondary
7. Primary Utils
8. Replace Node
Home
9. Dev Properties
8:35A
1. Include Node
(refer to INSTALLATION CHECKLIST pg. 6)
2. Exclude Node
Use this option to remove a device from the
network (refer to the individual device
instruction sheet for details).
3. Network Rediscovery
This feature is used for updating your network,
specifically if nodes have moved or the network
environment has changed.
NETWORK
Selecting 7. System Setup
from the MAIN MENU screen
will bring you to the SYSTEM
SETUP screen.
Selecting 1. Install Checklist
brings you to the Installation
Checklist (refer to pg. 6).
NOTE: This feature is not
available on secondary remotes.
Selecting 2. Advanced will
prompt you to continue with
Advanced Settings. Pressing
the right soft key (YES) will
bring you to the ADVANCED
screen.
NOTE: If you are unsure about any of the
following ADVANCED SETTINGS consult
Vizia RF + system guide or visit our
website at www.ViziaRFplus.com.
x1
Back
SYSTEM SETUP
Home
8:35A
1. Install Checklist
2. Advanced
SYSTEM SETUP
x1
NO
ADVANCED
Advanced
Settings?
YES
8:35A
20