Lexicon 960L - Page 75

Lexicon
6-43
F] Flash Operations:
This menu selection is used for programming the Program Flash memory with the LARC2 application
(Program App) and/or to program the Boot ROM (Burn Boot Flash). These options are available from
the menu shown below:
************************************************
* Flash Management Options
************************************************
w] Program App
b] Burn BOOT flash
e] Erase PROGRAM flash
s] Save a copy of the BOOTROM
r] Restore BOOTROM
2] Program STAGE2
D] Interactive Diagnostics:
This menu selection is used to enter the Interactive Diagnostics Menu from the Option Board Menu.
S] Diagnostics Suite:
This is the same test that resides on the Interactive Diagnostics Menu. This menu selection can also be
used to execute the Diagnostics Suite from the Option Board Menu.
Z] ZModem Download:
This menu selection is used to download the LARC2 Boot ROM (boot.rom) and/or Program Flash
image (larc2.rom) via the Debug Port on the LARC2 Option Board using the Zmodem transfer protocol.
O] Option-Board Test:
This menu selection is used to execute the Option Board Test from the Option Board Menu.
NOTE: The remaining selections available from the Option Board Menu were designed specifically for use
during the LARC2 hardware development, and are outside the scope of this document.