Lexicon 960L - Pin Descriptions

960L Multi-Channel Digital Effects System Service Manual
7-18
S1 : 1/3/5/7 S1 : 2/4/6/8
S0:1 S0:3 S0:5 S0:7
S0:2 S0:4 S0:6 S0:8
I2S0,1,2,3
SDO0,2,4
SDO1,3,5
TMIX_WCKI
IOBUS_WCLK/
S2 : 1/3/5/7
S2:1 S2:3 S2:5 S2:7
S2:2 S2:4 S2:6 S2:8
I2S0,1,2,3
SDO1,3,5
TMIX_WCKI
IOBUS_WCLK/
S2 : 2/4/6/8 S3 : 1/3/5/7 S3 : 2/4/6/8
S1:1 S1:3 S1:5 S1:7
S1:2 S1:4 S1:6 S1:8
SDO0,2,4
channel number
*S0:1 S0:3 S0:5 S0:7
S0:2 S0:4 S0:6 S0:8
Pin Descriptions
Pin Name Type Description
Host Interface
40 PWROK INPUT POWER OK - 0 : resets various internal state, 1: normal operation
44 RESET/ INPUT RESET/ - 0 : resets various internal state, 1: normal operation
82 ALL_MUTE/ INPUT ALL MUTE - 0 : forces SDI0-5 to zero, 1 : normal operation
50 CS/ INPUT CHIP SELECT/ - 0 : this slot is being selected, 1 : not selected
47 DS/ INPUT DATA STROBE - data is captured on rising edge of DS/
48 WR/RD INPUT WR/RD - 0 : write operation, 1 : read operation
66 A0 INPUT Address 0 - select which register is written/read to/from (see register
description section)
65 A1 INPUT Not used.
62 A2 INPUT Not used.
61 A3 INPUT Not used.
60 A4 INPUT Not used.
59 A5 INPUT Not used.
58 A6 INPUT Not used.
56 A7 INPUT Not used.
67 D7 BIDIR Data Bus <7> - data is written/read over this bus
68 D6 BIDIR Data Bus <6> - data is written/read over this bus
69 D5 BIDIR Data Bus <5> - data is written/read over this bus
70 D4 BIDIR Data Bus <4> - data is written/read over this bus
72 D3 BIDIR Data Bus <3> - data is written/read over this bus
77 D2 BIDIR Data Bus <2> - data is written/read over this bus
80 D1 BIDIR Data Bus <1> - data is written/read over this bus
81 D0 BIDIR Data Bus <0> - data is written/read over this bus
Clocks