Lexicon LXP-5 Service Manual

LXP-5 Service Manual
Performance
Verification
When this position is selected by FUNCTION, an alternative system exit can
be chosen by turning ADJUST (see Table 3). If an ADJUST position is
selected for which there is no program, the LEARN and OVLD LEDs will flash
alternately to indicate an error. At this time another diagnostic program may
be selected.
This system exit program instructs the LXP-5 to dump the contents of all user
registers through the MIDI OUT jack. This program allows the user to copy
these registers to another unit.
This program allows the user to exit to the system without going through the
boot diagnostic tests. This procedure is useful when troubleshooting a unit
that will not power up correctly due to a boot diagnostic failure.
Test Programs, cont'd.
Alternative System Exits
(User 8)
All Registers Dump Exit
(User 8: MIN;
Exit to System
without Diagnostics
(User 8:9j
2-9

Lexicon LXP-5 Specifications

General

Brand	Lexicon
Model	LXP-5
Category	Recording Equipment
Language	English