3 Select the communications port you assigned to the printer
(COM1 or COM2).
4 Click Properties.
5 On the Port Settings tab, set the serial parameters to the exact
same serial parameters in the printer.
Look for the printer settings under the Serial Standard (or
Serial Option X) heading on the Menu Settings page you
printed earlier.
6 Click OK, and then close all the windows.
7 Print a test page to verify printer installation.
a Click Start Settings Printers.
b Select the printer you just created.
c Click File Properties.
d Click Print Test Page. When a test page prints successfully,
printer setup is complete.
What do I do next?
Task Go to page…
After you have installed the printer driver on your
computer, you are set up to print to a local printer.
We recommend that you also complete “Verify printer
setup.”
64
Install drivers for local printing
63
To Next Page
Loading...
