Tray 1 Type
Custom Type 1
1
Menu
2
Select
3
Return
4
Go
5
Stop
6
Loading the multipurpose feeder
Note: The multipurpose feeder can only feed one sheet
of glossy paper or banner paper at a time. Loading more
than one sheet may cause paper jams. See
page 38 for
capacity limits for other types of print media.
8 Press Menu until you see Tray 1
Type, and then press Select.
9 Press Menu until you see Custom
Type 1, and then press Select.
10 Press Return once.
11 Press Menu until you see Custom
Types, and then press Select.
12 Press Menu until you see Custom
Type 1, and then press Select.
13 Press Menu until you see the type
of media you loaded in the heavy
media tray, and then press Select.
14 Press Go. Ready is displayed.
The multipurpose feeder provides an
additional input of 100 sheets of paper.
You can use the multipurpose feeder one
of two ways:
• Paper tray—Load plain paper,
glossy paper, labels, card stock,
or other print media in the feeder
with the intention of leaving the
media in the feeder.
• Manual bypass feeder—Send a
print job to the feeder while
specifying the type and size of
media from your computer. The
printer then prompts you to load
the appropriate print media before
it prints.
Load paper
45