Lexmark C912 Setup Guide

Step 9: Verify printer setup
Printing a menu
settings page
Note: For more information
about using the printer
operator panel and changing
menu settings, refer to the
publications CD.
Printing a network
setup page
Note: If an optional
MarkNet print server is
installed, you see Print
Net1 Setup on the display.
UTILITIES MENU
1
Menu
2
Select
3
Return
4
Go
5
Stop
6
Print a menu settings page to review the default printer settings and to
verify that printer options are installed correctly.
1 Make sure the printer is on.
2 Press Menu until you see UTILITIES MENU, and then press
Select.
3 Press Menu until you see Print Menus, and then press
Select to print the page.
The message Printing Menus appears on the display.
4 Verify that the options you installed are correctly listed under
“Installed Features.”
If an option you installed is not listed, turn the printer off, unplug
the power cord, and reinstall the option.
5 Verify the amount of memory installed is correctly listed under
“Printer Information.”
6 Verify that the paper trays are configured for the sizes and types
of paper you loaded.
If the printer is attached to a network, print a network setup page to
verify the network connection. This page also provides important
information that helps you configure for network printing.
1 Make sure the printer is on.
2 Press Menu until you see UTILITIES MENU, and then press
Select
.
Verify printer setup
64

Lexmark C912 Specifications

General

Brand	Lexmark
Model	C912
Category	Printer
Language	English