Memory tests
This setting lets you test or
flash
the printer memory or test or format the printer hard disk.
1 Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Memory tests
2 Select a setting.
Add-on cards tests
This setting allows you to test the add-on cards installed on the printer.
1 Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Add‑on cards tests
2 Select a card.
Universal Override
This setting allows the user to feed custom media sizes to a Custom Media Tray.
For non-touch-screen printer models, press
to navigate through the settings.
1 Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Universal Override
2 Select a setting to adjust.
Scanner diagnostics
Feed Test
This test allows for a continuous feed from the ADF or
flatbed.
1 Enter the Diagnostics menu, and then navigate to:
Scanner diagnostics > Feed Test
2 Select a paper size.
3 From the Feed Test section, touch Start.
Sensor tests
This test
verifies
the status of the scanner sensors.
1 Enter the Diagnostics menu, and then touch Scanner diagnostics.
2 From the Sensor tests section, touch Start.
A dialog listing the sensor tests appears.
3 Find, and then manually toggle the sensor.
7017-2xx, -4xx, -6xx
Service menus
177
To Next Page
Loading...
