Lexmark MB2546 - Updating the Printer Firmware

3 Navigate to the folder where the zip files are extracted from the Service Restore Tool.
4 Select the file to import, and then click Import.
5 Repeat step 2 through to step 4 for the other files that are included in the extracted zip file.
Updating the printer
firmware
Warning—Potential Damage: Before updating the printer firmware, ask the next level of support for the
correct code. Using an incorrect code level may damage the printer.
The printer must be in ready state in order to update the firmware.
Using a flash drive
This option is available only in printer models with front USB port.
Make sure to enable the Enable Drive and Update Code settings. You can find the settings in the Flash drive
menu under the Settings menu.
1 Insert the flash drive into the USB port.
2 From the home screen, navigate to USB Menu: Print from USB > Accept or OK.
3 Select the file that you need to flash.
Note: Do not turn o the printer while the update is going on.
7017-2xx, -4xx, -6xx
Parts removal
191