4 Remove the top cover. See “Top cover removal” on page 276.
5 Remove the redrive assembly. See “Redrive assembly removal” on page 274.
6 Remove the two screws (A), and then remove the plate.
A
7 Remove the sensor.
Redrive assembly removal
1 Remove the rear cover. See “Rear door and cover removal” on page 273.
2 Remove the scanner rear cover. See “Scanner rear covers removal” on page 272.
3 Remove the right cover. See “Right cover removal” on page 223.
4 Remove the four screws (A), and then disconnect the cable (B).
5 From the controller board, disconnect the redrive cable.
6 Flex and hold the top cover, and then remove the redrive assembly.
7017-2xx, -4xx, -6xx
Parts removal
274
To Next Page
Loading...
