Lexmark MB2546 - Identifying Jam Locations

Entering the Service Engineer (SE) menu
To access the Service Engineer (SE) menu:
1 Turn on the printer.
2 When the home screen appears, press * * 411 on the control panel.
For 2‑line control panels, press the right arrow button twice, press OK, and then press the left arrow button.
General SE
This setting allows you to save a log file to a USB drive.
Enter the Service Engineer (SE) menu, and then navigate to:
General SE > Capture Logs to USB Drive
Network SE
Enter the Service Engineer (SE) menu, and then touch Network SE.
Note: Use these settings as directed by the next level of support.
Top level menu Intermediate menu
Print SE Menus Print SE Menus
History
• Print History
• Mark History
MAC
• Set Card Speed
• LAA
• Keep Alive
NPAP Print Alerts
TCP/IP
• netstat
• arp
• Allow SNMP Set
• MTU
• Meditech Mode
• RAW LPR Mode
Wireless Enable Wi‑Fi Direct Sigma Control Agent
Ping Test
• Ping
• Ping6
Other Actions
• ifconfig
• IPtables [Firewall Dump]
• IP6tables [Firewall Dump]
• IPsec Dump
7017-2xx, -4xx, -6xx
Service menus
184