Lexmark Optra W810 - Page 216

Troubleshooting
216
Print too dark
The Print Darkness setting is
too dark.
Select a different Print Darkness
setting from the printer driver before
sending the job to print.
The toner cartridge is
defective.
Replace the toner cartridge.
Refer to the
User’s Reference or the
documentation that ships with the new
toner cartridge for detailed instructions.
The photoconductor cartridge
is defective or has been
installed in more than one
printer.
Replace the photoconductor cartridge.
Refer to the
User’s Reference or the
documentation that ships with the new
photoconductor cartridge for detailed
instructions.
Blurred background
The toner cartridge is
defective.
Replace the toner cartridge.
Refer to the
User’s Reference or the
documentation that ships with the new
toner cartridge for detailed instructions.
Uneven print density
The toner cartridge is
defective.
Replace the toner cartridge.
Refer to the
User’s Reference or the
documentation that ships with the new
toner cartridge for detailed instructions.
The photoconductor cartridge
is defective.
Replace the photoconductor cartridge.
Refer to the
User’s Reference or the
documentation that ships with the new
photoconductor cartridge for detailed
instructions.
The transfer roller is worn or
defective.
Replace the transfer roller.
Refer to the
User’s Reference or the
documentation that ships with the new
transfer roller for detailed instructions.
Print quality problems (continued)
Symptom Cause Solution