Troubleshooting
223
Jobs don’t print. The printer is not ready to
receive data.
Make sure
Ready
or
Power Saver
appears on the operator panel
display before sending a job to print.
Press
Go
to return the printer to the
ready state.
One of the printer supplies has
reached the end of life.
If
Replace Toner to Continue
or
Replace PC Kit to Continue
appears
on the display, you cannot continue
printing until you replace the supply
item specified in the message.
Refer to the
User’s Reference
or the
documentation that ships with your
supplies for detailed information.
The specified output bin is full. Remove the stack of paper from the
output bin and press
Go
.
The specified paper tray is
empty.
Load paper in the tray.
Refer to the
User’s Reference
for
detailed instructions on loading
paper trays.
You are using the wrong printer
driver or are printing to file.
Verify that you selected the printer
driver associated with the
Optra W810 printer.
Note:
If you are using a USB port,
make sure you are running
Windows 98 and using a Windows
98 compatible printer driver.
Other printing problems (continued)
Symptom Cause Solution
To Next Page
Loading...
