Changing printer settings
44
Multipage View = Auto*
= Long Edge
= Short Edge
The Multipage View setting determines the orientation of the
printed page with respect to the page images during Multipage
Print.
Select Auto to allow the printer to choose between portrait and
landscape positioning.
Select Long Edge to position the long edge of the print material
as the top of the page.
Select Short Edge to position the short edge of the print
material as the top of the page.
Note:
For PostScript emulation print jobs, the Auto setting is
always in portrait orientation.
Multipage Border = None*
= Solid
The Multipage Border setting determines whether a border is
printed around each page image during Multipage Print.
Select None if you do not want to print a border around each
page image.
Select Solid to print a solid line border around each page
image.
Staple Job
Note:
Staple Job is only
displayed when a finisher
option is installed.
= Off*
= On
Select On to staple each print job sent to the printer.
Note:
Setting Staple Job to On makes stapling the default for
the printer. We recommend setting Staple Job to Off and
selecting Staple Job from the printer driver.
Finishing Menu (continued)
Menu item Printer setting
* Factory default
To Next Page
Loading...
