Changing printer settings
58
Print Timeout = Disabled
= 1…225 (90*)
The Print Timeout setting determines the time (in seconds) the
printer waits before printing the last page of a print job that does
not end with a command to print the page. The print timeout
counter does not start until
Waiting
is displayed.
When a print timeout occurs, the printer stores the page in the
print buffer.
Select Disabled to turn Print Timeout off. When Print Timeout is
disabled, the printer does not print the last page of a print job
until one of the following occurs:
• The printer receives enough information to fill the page.
• The printer receives a Form Feed command.
• You select Print Buffer from the Job Menu.
Wait Timeout = Disabled
= 15…65535 (40*)
The Wait Timeout setting determines the amount of time (in
seconds) the printer waits to receive additional bytes of data
from the computer. When this timeout expires, the print job is
canceled.
Select Disabled to turn Wait Timeout off.
Wait Timeout is only available when you use PostScript
emulation. The setting has no effect on PCL emulation print
jobs.
Setup Menu (continued)
Menu item Printer setting
* Factory default
To Next Page
Loading...
