Changing printer settings
61
Display Language = English
= French
= German
= Italian
= Spanish
= Danish
= Norwegian
= Dutch
= Swedish
= Portuguese
= Finnish
= Japanese
= Russian
= Polish
= Hungarian
= Turkish
= Czech
The Display Language setting determines the language that
appears on the operator panel display.
Note:
The default is set by the country. All values may not be
available.
Alarm Control = Off
= Single*
= Continuous
Select Single or Continuous if you want the alarm to sound any
time the printer requires intervention.
Select Off if you do not want the alarm to sound.
Toner Alarm = Off*
= Single
= Continuous
Select Single or Continuous if you want the printer to stop
printing, display
Replace Toner Cartridge
, and sound the alarm
when a toner low condition occurs.
If you select Off, the printer displays
Replace Toner
and
continues printing.
Note:
Toner Alarm also applies to the photoconductor kit, fuser
unit, and transfer kit.
Setup Menu (continued)
Menu item Printer setting
* Factory default
To Next Page
Loading...
