Changing printer settings
62
Staple Alarm = Off*
= Single
= Continuous
Select Single or Continuous if you want the printer to stop
printing, display
Load Staples
, and sound the alarm when you
send a staple job to print but the staple cartridge is empty.
Either load the stapler, or press
Go
to clear the message and
continue printing without stapling.
If Staple Alarm is set to Off, the printer displays
Load Staples
and continues printing the job without stapling.
Job Buffer Size
Note:
Job Buffer Size is only
displayed when a hard disk
option is installed, is neither
defective, Read/Write nor
Write protected, and Job
Buffer Size is not set to 100%.
= Disabled*
= 10%…100%
Job buffering lets you delay processing of a print job. The job is
temporarily stored on an optional hard disk before being
printed. This usually frees the host computer during the actual
printing of a print job.
The Job Buffer Size menu item lets you select the amount of
hard disk space allocated to job buffering for all ports. Job
Buffer Size can be set to Disabled or from 10% to 100% in 1%
increments. See “Job Buffering setting” on page 168 for more
information.
Note:
When the job buffer size is changed and saved, the hard
disk is reformatted and current hard disk contents are deleted.
Job Accounting
Note:
Job Accounting is only
displayed when a hard disk
option is installed, is neither
defective, Read/Write nor
Write protected, and Job
Buffer Size is not set to 100%.
= Off*
= On
Set Job Accounting to On to use an optional disk to store
statistical information about your most recent print jobs. The
statistics include whether the job printed with or without errors,
the time required to print the job, the size (in bytes) of the job,
the requested paper size and paper type, the total number of
printed pages, and the number of copies requested.
If your printer has a hard disk installed, it is capable of compiling
print job statistics and storing them to disk. You may print these
statistics. See “Tracking job statistics” on page 170 for more
information.
Setup Menu (continued)
Menu item Printer setting
* Factory default
To Next Page
Loading...
