Blocking faxes from unidentified senders
From the home screen, navigate to:
> Fax Setup > Fax Blocking > Block No ID > On > Accept
Can I retrieve failed faxes?
The printer saves an incoming fax in the printer memory before it prints the fax. If the printer runs out of ink or runs
out of paper, then the printer will automatically print the fax after the error is resolved.
If a fax was not sent or received due to power loss, then the printer will automatically send any outgoing faxes or print
any incoming faxes that were saved in the printer memory when the power is restored.
Faxing 97
To Next Page
Loading...
