• Rear
24 Close the trays.
25 Connect the power cord to the printer, and then to the electrical outlet.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
26 Turn on the printer.
Add the tray in the print driver to make it available for print jobs. For more information, see
“Adding available
options in the print driver” on page 316.
When installing hardware options, follow this order of installation.
• 3000‑sheet tray
• Printer
• Staple finisher
Upgrading and migrating 302
To Next Page
Loading...
Need help?
General
