D. UNDER THE HOOD (Conti nued)
71
2007MY LS460L/LS460
c) Headlight aiming inspection
1. Cover or disconnect the con-
nector of the headlight on the
opposite side to prevent light
from the headlight not being
inspected from affecting head-
light aiming inspection.
Note: Do not keep the head-
light covered for more than 3
minutes. The headlight lens is
made of synthetic resin, and
may easily melt or be dam-
aged due to heat.
Hint: When checking the aim
of the highïbeam, cover the
lowïbeam or disconnect the
connector.
2. Start the engine.
To Next Page
Loading...
