Lexus Supports ASE Certification
Page 1 of 3
Title:
INITIALIZATION OF FRONT MEMORY
SEAT ECU DURING PDS
Models:
’07 LS 460
Technical Service
Information Bulletin
September 27, 2006
PD075 -06
As a result of the removal of the DCC fuses (No. 1 and No. 2), the “driving position
memory” function of the driver’s seat will be inoperative due to loss of the seat position
memory stored in the seat ECU.
Initialize the front memory seat ECU after installing the DCC fuses during Pre-Delivery
Service (PDS).
S 2007 model year LS 460 vehicles.
OP CODE DESCRIPTION TIME OFP T1 T2
N/A Not Applicable to Warranty – – – –
1. Simultaneously operate the seatback
angle switch to the rear side and the
vertical height adjustment switch to
the lower side until a beep is heard.
PRE-DELIVERY SERVICE
Introduction
pplicable
Vehicles
W arranty
Information
Driver’s Seat
Initialization
Procedure
To Next Page
Loading...
