INITIALIZATION OF FRONT MEMORY SEAT ECU DURING PDS -- PD075-06 September 27, 2006
Page 3 of 3
4. Operate the head restraint height
adjustment switch and check that
the head restraint moves to the
uppermost and lowermost
positions normally. (Refer to “1”
in the illustration.)
5. Operate the seat position control
switch and check that the seat slides
forward and rearward and that the
beep is NOT heard. (Refer to “2” in
the illustration.)
Driver’s Seat
Initialization
Procedure
(Continued)
1
1
2
2
To Next Page
Loading...
