LG 42PB4D - Screen Setup for Pc Mode

EXTERNAL EQUIPMENT SETUP
34
EXTERNAL EQUIPMENT SETUP
Screen Setup for PC mode
Overview
When RGB connect to PC output and select the RGB-PC in Main
Input, this function is used.
When HDMI IN 1(DVI) connect to PC output and select
HDMI1/DVI input, this function is used.
In RGB-DTV mode, SIZE and PHASE is not available.
Position
G
Size
Phase
Reset
Adjust Close
Position
Size
Phase
Reset
G
FLASHBK
APM
CC
Initialize Settings
Yes
No
Adjust Previous Move Select
Position
This function is to adjust picture
to left/right and up/down as you
prefer.
Size
This function is to minimize any
vertical bars or stripes visible on
the screen background. And the
horizontal screen size will also
change.
Phase
This function allows you to
remove any horizontal noise and
clear or sharpen the image of char-
acters. In HDMI/DVI-PC mode,
PHASE is not available.
Press the
ADJUST
button and then use
D
or
E
button to
select
Position
,
Size
, or
Phase
.
Press the
ENTER
button and then use
D
/
E
or
F
/
G
button to make appropriate adjustments.
■
The
Phase
adjustment range is
-16
~
+16
.
■
The
Size
adjustment range is
-30
~
+30
.
Press the
ENTER
button.
Adjustment for screen Position, Size, Phase, Reset
Press the
ADJUST
button and then use
D
or
E
button to
select
Reset
.
Press the
ENTER
button and then use
F
or
G
button to
select
Yes
.
Press the
ENTER
button.
Initializing
(
Reset to original factory values
)
2
3
1
2
3
1
To initialize the adjusted values.