Connecting
25
Connecting
2
USB device connection
This unit can play movie, music and photo les
contained on a USB device.
Playback content in the USB
device
1. Insert a USB device into the USB port until it ts
into place.
2. Press HOME (
n
).
3. Select [Movie], [Photo] or [Music] using
A/D
,
and press ENTER (
b
).
4. Select the [USB] option using
W/S
, and press
ENTER (
b
).
5. Select a le using
W/S/A/D
, and press
d
(PLAY) or ENTER (
b
) to play the le.
6. Withdraw the USB device carefully after exiting
the USB mode.
y
This unit supports USB ash memory/
external HDD formatted in FAT16, FAT32 and
NTFS when accessing les (music, photo,
movie). However, for BD-Live, only FAT16
and FAT32 formats are supported. The USB
device can be used for local storage for
enjoying BD-Live discs from the Internet.
y
Please use the Internal HDD or USB ash
memory/external HDD formatted in either
FAT16 or FAT32 when using BD-Live.
y
This unit can support up to 4 partitions of
the USB device.
y
Do not extract the USB device during
operation (play, recording, etc.).
y
A USB device which requires additional
programme installation when you
have connected it to a computer, is not
supported.
y
USB device: USB device that supports
USB1.1 and USB2.0.
y
Movie, Music and photo les can be played.
For details of operations on each le, refer to
relevant pages.
y
Regular back up is recommended to
prevent data loss.
y
If you use a USB extension cable or USB HUB
or USB multi card reader, the USB device
may not be recognized.
y
Some USB device may not work with this
unit.
y
Digital camera and mobile phone are not
supported.
y
The USB Port on this unit cannot be
connected to a PC. The unit cannot be used
as a storage device.
y
Unformatted media cannot be used. Please
format before using.
y
If USB HDD cannot be recognized, try
another dierent USB cable.
y
Some USB cables may not supply enough
current for normal USB operation.
y
Files over 4GB are supported with NTFS
format.
,
Note
To Next Page
Loading...
