LG HR600 - [LANGUAGE] Menu; [AUDIO] Menu

System Setting
33
System Setting
3
[LANGUAGE] Menu
Display Menu
Select a language for the [Setup] menu and on-
screen display.
Disc Menu/Disc Audio/Disc Subtitle
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the
disc was recorded.
[Other]
Press ENTER (
b
) to select another language.
Use number buttons then press ENTER (
b
)
to enter the corresponding 4-digit number
according to the language code list on page
81.
[O] (Disc Subtitle only)
Turn o Subtitle.
Depending on the disc, your language setting
may not work.
,
Note
DTV Audio
Digital channels sometimes provide multiple audio
tracks, often in a dierent language or format
(Dolby Digital, Dolby Digital+, AVC, Mpeg, etc.). You
can set a default audio language with this setting.
If provided by the broadcaster, you can also select
a dierent audio language while viewing TV by
pressing AUDIO repeatedly. (See “Selecting DTV
audio language” on page 39.)
DTV Subtitle
Digital channels sometimes provide subtitles, often
in a dierent language. You can set a preferred
subtitle language with this setting, if DTV subtitles
are provided by the broadcaster. Press SUBTITLE
repeatedly to select a subtitle language while
viewing digital TV. (See “Selecting DTV subtitle
language” on page 39.)
[AUDIO] Menu
Each disc has a variety of audio output options. Set
the player’s Audio options according to the type of
audio system you use.
Since many factors aect the type of audio
output, see “Audio Output Specications” on
pages 86-87 for details.
,
Note
HDMI / Digital Output
Select the output sound format when a device
equipped with a HDMI or Digital Audio input jack
is connected to the HDMI OUT or DIGITAL AUDIO
OUT jack on this player.
[PCM Stereo]
Select if you connect this unit’s HDMI OUT or
DIGITAL AUDIO OUT jack to a device with two-
channel digital stereo decoder.
[PCM Multi-Ch] (HDMI only)
Select if you connect this unit’s HDMI OUT jack
to a device with multi-channel digital decoder.
[DTS Re-Encode]
Select if you connect this unit’s HDMI OUT or
DIGITAL AUDIO OUT jack to a device with a DTS
decoder.
[Primary Pass-Thru]
Select if you connect this unit’s DIGITAL AUDIO
OUT and HDMI OUT jack to a device with
LPCM, Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS and DTS-HD decoder.
y
When [HDMI] option is set to [PCM Multi-
Ch], the audio may output as PCM Stereo
if the PCM Multi-Ch information is not
detected from HDMI device with EDID.
y
If the [HDMI] or [Digital Output] option is
set to [DTS re-encode], the DTS Re-encode
audio is output for BD-ROM discs with
secondary audio and the original audio is
output for the other discs (like [Primary Pass-
Thru]).
,
Note