51
Settings
01
02
03
04
05
06
07
08
09
10
v
Preferred: You can set a list of preferred
networks and the phone attempts to register
with first, before attempting to register to any
other networks. This list is set from the phones
predefined list of known networks.
GPRS attach (Menu 9.4.2.2)
You can set GPRS service depending on various
situations.
v
Power on
If you select this menu, the phone is
automatically registered to a GPRS network
when you switch the phone On. Starting a
WAP or PC dial-up application created the
connection between phone and network and
data transfer is possible. When you end the
application, GPRS connection is ended but the
registration to the GPRS network remains.
v
When needed
If you select this menu, the GPRS connection
is established when you connect a WAP or
application service and closed when you end
the WAP or applicaion connection.
Acess point (Menu 9.4.2.3)
v
View: View the access point name.
v
Edit: Edit the access point name.
TIP! Changes could effect other contents.
Network profile
v
Data connections
• Name: You can type the network name.
•
Bearer: You can set the bearer data service.
1 Data/2 GPRS
<Data settings>
Appears only if you select Data Settings as a
Bearer/service.
-
Dial number: Enter the telephone number
to dial to access your WAP gateway.
-
User ID: The users identity for your dial-up
server (and NOT the WAP gateway).
-
Password: The password required by your
dial-up server (and NOT the WAP gateway)
to identify you.
-
Call type: Select the type of data call;
Analogue or Digital (ISDN).
-
Call speed: The speed of your data
connection; 9600 or 14400 (Depends on
Operator)
-
Linger time: You need to enter timeout
period.
After entering that, the WAP navigation
service will be unavailable if any data is not
input or transferred.
-
Primary server: Input the IP address of
the primary DNS server you access.
-
Secondary server: Input the IP address of
the secondary DNS server you access.
KF600_싱가폴 E_축_0222.indd 51 2007.2.22 3:58:25 PM