secure connections while bypassing the discovery and
authentication process.
To pair your phone with another Bluetooth device:
1. Verify your Bluetooth is active.
2. From the Bluetooth settings page, tap
Discoverable
to place a
checkmark and make your device visible. Your device must be
visible to successfully pair with an external device.
3. Tap
Scan for devices
. (Your device will display a list of
discovered in-range Bluetooth devices.)
4. Tap a device from the list to initiate pairing.
5. Depending on the device, you might have to tap Pair to accept
the passkey (if they match on both devices) or enter the
passkey or PIN Code.
6. Tap
Done
>
OK
if you entered a passkey or PIN code or
passkey.
7. The external device will then have to accept the connection
and enter your device’s PIN code.
●
●
Once successfully paired to an external device,
appears within the Status Bar.
256
To Next Page
Loading...
Need help?
General
