Check the Failure Code
■
When the oven has some failure on cooking,
Cooking will be canceled and log data of F-code will be recorded in EEPROM.
F-code will not display during normal operation.
■
Check the failure code as follow these steps.
1. press the “CLEAR” Button
2. press the “BAKE” and “BROIL” button at the same time
If the oven has some failure, the Oven will show the failure Code, like FIG. 1
If the oven do not has any failure, the Oven will show it like FIG. 2
NOTE:
After checking the F code, press the “CLEAR” button to remove all codes.
7-1
CHECK THE FAILURE CODE
< FIG. 1 >
< FIG. 2 >
Type of F-Code
Time of the failure occurrence
To Next Page
Loading...
Need help?
General
