7400 Series UPS
Single and 1+1 IOM Manual 6310018a.02.doc
Prelim iii
Issue 2
(02/98)
ELECTRO MAGNETIC COMPATIBILITY
WARNING
This is a UPS for restricted sales distribution to informed partners with the appropriate
EMC technical competence. Installation restrictions or additional measures may be needed
to prevent disturbances (EMC Standard 50091-2).
To convert to a class `A' UPS, the following factory installed
optional e.m.c. kits must be fitted:
80 kVA Module - Option kit part number 4641018 S
120 kVA Module - Option kit part number 4641014 O
200 kVA Module - Option kit part number 4641029 D
300 kVA Module - Option kit part number -
400 kVA Module - Option kit part number -
When fitted with the above optional e.m.c. kits the following warning applies:
This is a class `A' UPS product. In a domestic environment this product
may cause radio interference in which case the user may be
required to take additional measures.
This equipment complies with the requirements of the EMC Directive 89/336/EEC
and the published technical standards.
Continued compliance requires installation in accordance with these instructions
and the use of manufacturer approved accessories only.
To Next Page
Loading...
Need help?
General
