Liebert NX 30 User Manual

8 User Manual 10H52192UM60 - Rev. 1 - 09/2011
Liebert NX Installing the UPS Module
1.2 Unpacking
To avoid damaging the equipment, be extremely careful when removing the packaging. Check all packaging materials to ensure
that no items are discarded. Position the sloped pallet top cover in front of the pallet, as shown in Figure 1-1 and fix them together
using the hook, then roll the UPS gently down the resulting slope, as illustrated in Figure 1-1.
Figure 1-1 Unpacking
1.3 Initial Check
Check the following items before installing the UPS:
1. Inspect the UPS and battery externally and internally for signs of any damage that may have occurred during shipping. Report
any such damage to the shipper immediately.
2. Verify the UPS label and check that the UPS conforms to the data indicated on it. The UPS label is attached to the back of the door.
The UPS model, capacity, and main parameters are marked on the label.

Liebert NX 30 Specifications

General

Brand	Liebert
Model	NX 30
Category	Power Supply
Language	English