Lightware MX-FR9

 MX-FR Series Modular Matrix Frames – User's Manual 105

Saving a Preset
<id>. All frames have 32 preset memories.
Command and Response #preset
ȩ {$<id>}
Ȩ (SPR<id2>)CrLf
Example
ȩ {$4}
Ȩ (SPR04)CrLf
Current crosspoint state is saved to Preset 4, including the mute state of the outputs.
ATTENTION!  Lock states are not saved. Lock state is assigned to the physical output of the router. Presets
do not affect output locks.
Loading a Preset
<id>.
Command and Response
ȩ {%<id>}
Ȩ (LPR<id2>)CrLf
Example
ȩ {%4}
Ȩ (LPR04)CrLf
Current crosspoint state is changed according to Preset 4, including the mute state of the outputs.
INFO:  Locked outputs are left unchanged. Presets do not affect output locks.
Preset Preview
The peview of the stored preset <id> without loading it. The response depends on the crosspoint size.
Command and Response
ȩ {VP#<id>=?}
Ȩ (VP#<id>=•<O1>•<O2>•<O3>•<O4>•<O5>•<O6>•<O7>•<O8>•<O9>)CrLf
Parameters
 Parameter description Parameter values
<Ox> Output port number <in2>: <Ox> is connected to <in2>, <Ox> is not muted.
M<in2>: <Ox> is connected to <in2>, <Ox> is muted.
Example
ȩ {vp#3=?}
Ȩ (VP#3= 02 M02 M01 02 02 01 01 01 01)CrLf
Viewing connections for Preset 3. Input 2 is connected to Outputs 1, 2, 4 and 5. Input 1 is connected to all
other outputs. Outputs 2 and 3 are muted.
Renaming a Preset
Command and Response
ȩ {PNAME#<id>= <preset_name>}
Ȩ (PNAME#<id>= <preset_name>)CrLf
Example
ȩ {pname#1=First preset}
Ȩ (PNAME#1=First preset)CrLf
Preset 1 was named as 'First preset'.
Renaming an Input
Command and Response
ȩ {INAME#<in>=<input_name>}
Ȩ (INAME#<in>=<input_name>)CrLf
Example
ȩ {iname#3=Media_Player}
Ȩ (INAME#3=Media_Player)CrLf
Input 3 was named as 'Media_Player'.
Renaming an Output
Command and Response
ȩ {ONAME#<out>=<output_name>}
Ȩ (ONAME#<out>=<output_name>)CrLf
Example
ȩ {oname#2=Monitor#2}
Ȩ (ONAME#2=Monitor#2)CrLf
Output 2 was named as 'Monitor#2'.

Command and Response #preset
ȩ {PNAME#<id>=?}
Ȩ (PNAME#<id>= <preset_name>)CrLf
Example
ȩ {pname#1=?}
Ȩ (PNAME#1=First_preset)CrLf
Name for Preset 1 is 'First_preset'.



