Lightware MX-FR9

 MX-FR Series Modular Matrix Frames – User's Manual 99

7
Programmer’s Reference
The user can connect to the matrix through Ethernet, serial port or USB. After establishing the connection, there

routers can be controlled with external devices that can communicate according to the router protocol. Lightware
routers have a special protocol, but to interoperate with third-party devices, a secondary protocol is also provided.
The supported LW2 commands are described in this chapter:
ç 
ç 
ç 
ç 
ç 
ç 
ç 
ç 
ç 
ç 
ç 
ç 
ç 
ç 
ç 



