Lightware MX-FR9

4. Operation MX-FR Series Modular Matrix Frames – User's Manual 40

The Remote Power Feature of MX-TPS Boards
WARNING!             
extenders to the TPS boards, as the devices will be damaged.

The following boards support this feature:
▪ MX-TPS-IB, -A, -S
▪ MX-TPS-OB, -A, -S
To use remote powering, you will need the following:
▪ PSU-12VP (part no: 91340007) external PSU,
▪ 
Important instructions
▪ 
third party devices.
▪ 
Cable length

cables. The remote powering can be enabled or disabled for each port separately. Some of the ports can have
remote powering enabled for Lightware extenders, while other ports can have remote powering disabled and

Settings in the TPS Board
Place the jumper block to the indicated position in the board at all desired TPS ports:
Setting in the Extender

right position:



