MX-FR Series Modular Matrix Frames – User's Manual 149
Analog Audio I/O Port
Output Port Parameters
ȩ {:AUDOUT#@=?}
ȩ {:AUDOUT#@=<vol>;<bal>;<bass>;<treb>;<deemp>;<ph>}
Input Port Parameters
ȩ {:AUDIN#@=?}
ȩ {:AUDIN#@=<vol>;<bal>;<gain>;<ph>;x}
DVI-DL Output Port
Port Parameters and Settings
ȩ {:ISL54105#<out>@O=?}
ȩ {:ISL54105#<out>@O=x;x;x;<mode>}
DVI-OPT Output Port
Port Parameters and Settings
ȩ {:TOSA#<out>@O=?}
ȩ {:TOSA#<out>@O=<laser>;}
RICOD Related Commands
Setting the RICOD MASTER Command
ȩ {:RICOD#<in>@I=<A1><A2>;<B>;<C>;}
ȩ {:RICOD#<in>@I=?}
ȩ {:RICOD_SLEN#<out>@O=?}
Setting the RICOD SLAVE Status
ȩ {:RICOD_SLEN#<out>@O=<num>}
RS-232 over Fiber Commands
Sending Data in Text Format
ȩ {:S#@<S><ascii_text>}
Sending Data in Binary Format
ȩ {:B#@<S><hex_string>}
ȩ {:SERIAL#@<S>
Setting the Serial Parameters
ȩ {:SERIAL#@<S><a>;<b>;<c>;<d>}
RS-232 over TPS Commands
Sending Data in Text Format
ȩ {:S#@<S><ascii_text>}
Sending Data in Binary Format
ȩ {:B#<in2out2>@<S><hex_string>}
ȩ {:SERIAL#@<S>
Setting the Serial Parameters
ȩ {:SERIAL#@<S><a>;<b>;<c>}
Router Initiated Commands
EDID Status Changed
ȩ various
Port Status Changed (PSC)
ȩ none
Error Responses
To Next Page
Loading...
Need help?
General
