11. Appendix MX-FR Series Modular Matrix Frames – User's Manual 177
▪ HDMI and HDCP support on preview out and test in
▪ DualLink signals are supported by crosspoint level (mixed cards are supported).
▪ HDCP repeater function support
▪ MX-DVI-CPU SCH 2.2 support
▪ Extended protocol command set (E.g. diagonal switching)
▪ Monitor task dies eventually (very rare). It restarts automatically, so causes no visible problem.
▪ Sometimes there is no response to a command (extremely rare).
3.0.11
Released: 2011-04-06
New feature
▪
▪
▪
▪
▪
▪ Protocol#2 mode freezed when invalid characters were sent.
▪
▪ Automatic EDID refresh on LCD
▪ Preset didn't save the mute state.
▪ AD xpoint switching speed up
3.0.3
Released: 2012-12-22
New feature
▪ LCD menu improvements
▪ MX-DVII-HDCP-IB support
▪ Dual protocol mode. (In Protocol#1 mode Protocol#2 commands are also accepted.)
▪ MX-DVID-OB SCH 1.1 support
▪
▪ Preview output HDMI mode is possible now.
3.0.4
Released: 2010-12-23
▪
3.0.5
Released: 2010-01-24
New feature
▪ Recognising analog video formats by VESA GTF and CVT for MX-DVII-HDCP-IB
▪ 4-line LCD menu support
▪ ELIST command is added. ( Front LCD error list - errors since the last boot-up - is copied.)
▪ USB support is added.
▪ Xpoint factory default
▪
▪
▪
3.0.6
Released: 2011-01-31
New feature
▪ Coordinated Video Timings, Reduced Blanking support for MX-DVII-HDCP-IB
▪ 4-line LCD menu improvements
▪
▪ Power sum read-out is more redundant.
▪
3.0.7
Released: 2011-02-03
New feature
▪ HDCP keycounter menu on the LCD
▪
3.0.8
Released: 2011-02-24
To Next Page
