Lightware UMX-TP-TX100R - System Commands

Page 16 / 43 Section 4. Programmers reference
4.3.6. View CPU firmware compile time
Description: Shows the CPU firmware compile time.
Format
Example
Command
{CT}
→
{ct}
Response
(Compiled:<DATE>●<TIME>●
Build:<tag>)CrLf
←
(Compiled:Sep 21 2012 14:06:36
Build:4427)CrLf
Legend: <DATE> Month, Day and Year
<TIME> Hours, minutes and seconds
<tag> Identification number of the firmware
Explanation: The firmware was made in 21.09.2012, 14:06:36 and the identification
number of the firmware is 4427.
4.3.7. View installed I/O boards
Description: Shows the hardware name and revision of the installed cards. The number
of responses varies regarding the frame size (number of slots).
Format
Example
Command
{IS}
→
{is}
Response
(SL#●0●<MB_DESC>)CrLf
(SL●END)CrLf
←
←
(SL# 0 UMX-TP-TX100R SCH_1.2)CrLf
(SL END)CrLf
Legend: Slot 0 represents the motherboard.
<MB_DESC> The motherboard description contains the name and the
version number.
Explanation: The extender reports that it has one motherboard called UMX-TP-TX100R
and its version number is SCH_1.2.
4.4. System commands
4.4.1. Query current control protocol
Description: Shows the RS-232 control protocol.
Format
Example
Command
{P_?}
→
{p_?}
Response
(CURRENT●PROTOCOL●
=●#<x>)CrLf
←
(CURRENT PROTOCOL = #1)CrLf
Legend: <x> stands for the active protocol.
Explanation: Protocol 1 is active here.
Info: User can query the protocol only. This command is reserved for compatibility reasons.