Lightware UMX-TP-TX100R - Delete All Presets; Clone Preset; List Presets

Page 36 / 43 Section 4. Programmers reference
4.8.17. Delete all presets
Description: This command deletes all the presets from the analog input port.
Format
Example
Command
{:AF#<in>@SI=DEL;255}
→
{:af#2@si=DEL;255}
Response
(AF DELETED)CrLf
←
(AF DELETED)CrLf
Explanation: The command deletes all the presets.
4.8.18. Clone preset
Description: This command clones the desired preset to all of the input ports.
Format
Example
Command
{:AF#<in>@SI=CL;<PID>}
→
{:af#2@si=CL;1}
Response
(AF CLONED)CrLf
←
(AF CLONED)CrLf
Legend: <PID> Preset ID number
Explanation: This command is reserved for compatibility reasons.
4.8.19. List presets
Description: This command reads and lists all the saved presets from the analog VGA
input port.
Format
Example
Command
{:AF#<in>@<S/A>I=LIST}
→
{:af#2@si=list}
Response
(AF#<in>:<PID>=
<BL>;<LCF>;<FCL>;<LCVS>;
<SCN>;<VSPP>;<HSPP>;
<VPL>;<HPP>;<VSL>;<HSP>;
<FHSP>;<PHS>;)CrLf
(AF END)
←
←
(AF#2:1=
3045;1249;1864;3;
0;1;1;
50;495;1200;1600;
2161;23;)CrLf
(AF END)
Legend: <S/A>: Affected ports:
S = single selected input
A = all inputs
<PID> Preset ID number
<BL>: (8 x 28.6363M) / fhsync
<LCF>: 28.6363M / (256 * fvsync)
<FCL>: Number of lines in a whole picture
<LCVS> Number of lines during v.sync
<SCN> Screen scan type:
0 = progressive
1 = interlaced
<VSPP> V.sync polarity
0 = negative
1 = positive
<HSPP> H.sync polarity
0 = negative
1 = positive
<VPL> Vertical position in lines
<HPP> Horizontal position in pixels
<VSL> Vertical size in lines
<HSP> Horizontal size in pixels
<FHSP> Full horizontal size in pixels
<PHS> Phase (0 .. 31)
Explanation: One preset was saved to the input port 2.