Lightware UMX-TP-TX100R - Set Analog Color Properties; Save Analog Color Properties

Page 32 / 43 Section 4. Programmers reference
4.8.6. Set analog color properties
Description: Set analog color properties data of the input ports.
Format
Example
Command
{:PICTURE#<in>@<S/A>I=
<DF_CHA>;<DF_CHB>;<DF_CHC>;
<G_CHA>;<G_CHB>;<G_CHC>;
<O_CHA>;<O_CHB>;<O_CHC>;
<CONT>;<SAT>;<BRIGHT>;<HUE>;)
→
{:picture#2@si=
1023;1023;1023;
1023;1023;1023;
1023;1023;1023;
128;128;0;0;)CrLf
Response
(PICTURE#<in>@<S/A>I=
<DF_CHA>;<DF_CHB>;<DF_CHC>;
<G_CHA>;<G_CHB>;<G_CHC>;
<O_CHA>;<O_CHB>;<O_CHC>;
<CONT>;<SAT>;<BRIGHT>;<HUE>;)CrLf
←
(PICTURE#2@SI=
1023;1023;1023;
1023;1023;1023;
1023;1023;1023;
128;128;0;0;)CrLf
Legend: <S/A>: Affected ports:
S = single selected input
A = all inputs
<DF_CHA> Digital fine-clamp for CH-A:
0-4096
<DF_CHB> Digital fine-clamp for CH-B:
0-4095
<DF_CHC> Digital fine-clamp for CH-C:
0-4095
<G_CHA> Gain for CH-A:
0-1023
<G_CHB> Gain for CH-B:
0-1023
<G_CHC> Gain for CH-C:
0-1023
<O_CHA> Offset for CH-A:
0-1023
<O_CHB> Offset for CH-B:
0-1023
<O_CHC> Offset for CH-C:
0-1023
<CONT> Contrast:
0-255
<SAT> Saturation:
0-255
<BRIGHT> Brightness:
0-255
<HUE> Hue:
0-127
Info: Analog color setting will not be saved automatically. User can save it with the next
command.
4.8.7. Save analog color properties
Description: Save analog color properties of the input ports.
Format
Example
Command
{:PICTURE#<in>@<S/A>I=SAVE}
→
{:picture#3@si=save)CrLf
Response
(P SAVED)CrLf
(PICTURE#<in>@<S/A>I=
<DF_CHA>;<DF_CHB>;<DF_CHC>;
<G_CHA>;<G_CHB>;<G_CHC>;
<O_CHA>;<O_CHB>;<O_CHC>;
<CONT>;<SAT>;<BRIGHT>;<HUE>;)CrLf
←
←
(P SAVED)CrLf
(PICTURE#3@SI=
1023;1023;1023;
1023;1023;1023;
1023;1023;1023;
128;128;0;0;)CrLf
Legend: Please read section 4.8.6 on page 32.