Time-based Trip Computers
The Current Trip (CURRENT), Today’s Trip (TODAY) and Previous Day’s Trip (PREVIOUS DAY)
computers all track similar information for different time periods.
The ScanGauge automatically records trip data as you operate your vehicle. The information from
the Current Trip is automatically reset each time you shut off your vehicle for more than 3 minutes.
Information from the Today’s Trip is automatically transferred to the Previous Day’s Trip when the engine
has been shut off for 8 to 10 hours.
To view the trip data, push the upper left or right function buttons to cycle through the available data.
The diagram below uses the Current Trip screens as an example.
< >
<CURRENT RESET>
3.30 GALLONS
< >
<CURRENT RESET>
40.6 MILES
< >
<CURRENT RESET>
0.5 HOURS
< >
<CURRENT RESET>
35 MPH AVG
< >
<CURRENT RESET>
12.3 MPG
< >
<CURRENT RESET>
125 WT MAX
< >
<CURRENT RESET>
2879 RPM MAX
< >
<CURRENT RESET>
65 MPH MAX
< >
<CURRENT RESET>
$ 9.90 COST
30 — www.ScanGauge.com
To Next Page
Loading...
