7
2. Wait for the indicator LED on the front of your range extender to blink amber before
going to step 3 . This can take up to a minute.
3. Extend your 2.4 GHz network.
a. Press the WPS button on your router.
Within the next two minutes complete step
3b.
b. Press the WPS button on the side of your range extender. The WPS button will
light up and the indicator LED on the front of your range extender will blink
g
reen.
Watch the indicator L ED on the front of your range extender to verify whether the
connection was successful.
If it turns solid green , the connection was successful. Move to step 4.
To Next Page
Loading...
