EasyManuals Logo
Home>Lippert Components>Lifting Systems>ground control 3.0

Lippert Components ground control 3.0 User Manual

Lippert Components ground control 3.0
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
Ground Control® 3.0
Aftermarket Manual
lci1.com (574) 537-8900 Rev: 04.19.18
CCD-0001307
System and Safety Information
Failure to act in accordance with the following may
result in death or serious personal injury. The use of
the Ground Control® 3.0 leveling system to support
the trailer for any reason other than which it is
intended is prohibited by Lippert’s limited warranty.
The Lippert leveling system is designed as a leveling
system only and should not be used to provide
service for any reason under the trailer such as
changing tires or servicing the leveling system. Any
attempts to change tires or perform other service
while trailer is supported by the Ground Control®
3.0 leveling system could result in death, serious
injury or damage to the 5th wheel.
Be sure to park the trailer on solid, level ground. Clear
all jack landing locations of debris and obstructions.
Locations should also be free of depressions. When
parking the trailer on extremely soft surfaces, utilize
load distribution pads under each jack. People and
pets should be clear of the trailer while operating
leveling system. Never lift the trailer completely off
the ground. Lifting the trailer so the wheels are not
touching the ground will create an unstable and
unsafe condition.
Moving parts can pinch, crush or cut. Keep clear and
use caution.
Prior to Operation
The leveling system should only be operated under the
following conditions:
1. The trailer is parked on a reasonably level surface.
2. Be sure all persons, pets, and property are clear of the trailer
while the leveling system is in operation.
3. Make sure battery(ies) are fully charged and test at 12+VDC
under load.
Touch Pad Diagram
Letter Description
A Up Arrow - Scrolls up through menu on LCD
B Down Arrow - Scrolls down through menu on LCD
C Enter - Activates modes and procedures on LCD
D Retract - Places system into retract mode (Press
and hold down for 1 second to initiate Auto Retract)
E LCD Display - Displays procedures and results
F Auto Level - Places system into auto level mode
G Front Button - Activates both front jacks
H Left Button - Activates left jack(s)
I Right Button - Activates right jack(s)
J Rear Button - Activates rear jacks
K Power Button - Turns system on and off
A
B
C
D
E
F
G
H I
J
K
Fig.22

Other manuals for Lippert Components ground control 3.0

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lippert Components ground control 3.0 and is the answer not in the manual?

Lippert Components ground control 3.0 Specifications

General IconGeneral
BrandLippert Components
Modelground control 3.0
CategoryLifting Systems
LanguageEnglish

Related product manuals