EasyManuals Logo
Home>Lippert Components>Lifting Systems>ground control 3.0

Lippert Components ground control 3.0 User Manual

Lippert Components ground control 3.0
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #23 background imageLoading...
Page #23 background image
23
Ground Control® 3.0
Aftermarket Manual
lci1.com (574) 537-8900 Rev: 04.19.18
CCD-0001307
Notes
1. For optimum performance, the system requires full battery
current and voltage. The battery MUST be maintained at full
capacity.
2. Check the terminals and other connections at the battery, the
controller, and the jacks for corrosion, and loose or damaged
connections.
3. Remove dirt and road debris from jacks as needed.
4. If jacks are down for extended periods, it is recommended
to spray exposed leveling jack rods with a silicone lubricant
every three months for protection. If the trailer is located in a
salty environment, it is recommended to spray the rods every
four to six weeks.
Preventative Maintenance

Other manuals for Lippert Components ground control 3.0

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lippert Components ground control 3.0 and is the answer not in the manual?

Lippert Components ground control 3.0 Specifications

General IconGeneral
BrandLippert Components
Modelground control 3.0
CategoryLifting Systems
LanguageEnglish

Related product manuals