Lippert Components ground control 3.0 User Manual

21
Ground Control® 3.0
Aftermarket Manual
lci1.com (574) 537-8900 Rev: 04.19.18
CCD-0001307
A
A
B C
10. Enter a pin to be the security code for accessing the remote
(Fig. 43).
11. Once a pin is entered the “Save” button (Fig. 44A) will appear
at the bottom right of the screen. To conrm the pin press
“Save”.
12. Re-enter the pin and save to conrm it.
Note: This pin will be required to access the remote and any
functions congured into it. Write the pin down for later
reference.
Resetting the Remote
Once the remote has been congured it can be recongured
in the event of a function changing or a new security pin is
required.
1. Turn the remote on by pressing and releasing the large silver
button at the bottom of the remote (Fig. 45C).
2. Press the large silver button 5 times (Fig. 45C).
3. Two options come up for reconguration:
A. “Set Pin” (Fig.45A) will allow the user to reset the pin and
enter a new one. Once the “Set Pin” option is selected the
user will be asked for verication that they want to reset the
pin (Fig. 46). Select “Yes” and the pin will be reset, follow
steps 10-12 of the “Conguring the Remote” section. Select
“No” to keep the current pin.
B. “Cong” (Fig. 45B) will allow the user to adjust the
conguration. To do so, select “Cong” and follow steps
1-9 of the “Conguring the Remote” section.
Fig.43 Fig.44
Fig.45 Fig.46

Lippert Components ground control 3.0 Specifications

General

Brand	Lippert Components
Model	ground control 3.0
Category	Lifting Systems
Language	English