2
Welcome! We are very pleased that you have
demonstrated your condence in us by purchasing
this planer/moulder and we will do our utmost to meet
your expectations.
Logosol has been manufacturing sawmills since 1988,
and since then we have supplied machines to satised
customers worldwide. We are want to assist you in
safely achieving the very best possible results from your
planer/molder. We therefore recommend that you take
the time to read this user manual from cover to cover
before you begin using the machine.
Remember that the planer/moulder itself is just part of
the value of the product. Much of the value is also to
be found in the expertise we pass on to you in the user
manuals. It would be a pity if that were not utilized.
We hope you get a lot of satisfaction from the use of
your planer/moulder.
Bengt-Olov Byström
Founder and Chairman of the Board,
Logosol AB
Thank you for choosing
a Logosol machine!
LOGOSOL is engaged in continuous development of its products.
We must therefore reserve the right to change
the design and form of our products.
Text: Bo Mårtensson
Document: Logosol PH360 Manual
Image: Bo Mårtensson, Lars Wahlström
Last Revised: September 2014
Manual, product no. 0458-395-0802
© 2010 LOGOSOL, Härnösand Sweden
To Next Page
Loading...
