LOOP EV-Flex EVSE - Page 46

Cellular APN: This is the gateway for all cellular trac. Contact your cellular operator for information
about this. For AT&T and Verizon LTE service, just leave it blank since the apn name is built-in in the modem.
Cellular APN PDP Type: An option to select the PDP type for APN conguration. The default of Cellular APN PDP Type
is IPV4V6.
Cellular APN User: This is the username your ISP has assigned to you (optional).
Cellular APN Password: Password to log into the ISP network (optional).
Cellular Dial Number: Phone number to dial for cellular network.
Cellular PIN Code: PIN code for the modem’s SIM card (optional). 4 digit number.
Primary DNS: The primary Domain Name Server (optional).
Secondary DNS: The secondary Domain Name Server (optional).
Cellular Signal Strength: The strength of cellular signal in dBm.
Cellular WAN IP Address: IP address of Cellular network.
Port Forwarding: To redirect a communication request from one address and port number combination to another
while the packets are traversing a network gateway.
Port Range: A port number is a 16-bit unsigned integer ranging from 0 to 65535. Port range denes a range which
can be used. The format for numeric port range is minimum-value:maximum-value.
Timeout RX: Timeout limitation of signal received by modem.
46
Loop EV-Flex
TM
EVSE
EVS-32A-L2-001 (R-Model)
v.20.9.4
www.evLoop.io