4.9 Replacing wastewater pump cover
Prerequisite:
Basket has been removed.
Filters has been removed.→Page 220
4.9.1 Removing wastewater pump cover
1. Scoop out any water.
Use a sponge if necessary.
2. Prise off the pump cover using a spoon and grip it by the crosspiece.
3. Lift the pump cover inwards at an angle and remove.
4.9.2 Installing wastewater pump cover
▶
Insert the pump cover (1) and press down (2).
The pump cover clicks into position.
Repair
To Next Page
Loading...
Need help?
General
