4.11 Replacing outer door
Prerequisite:
Appliance is disconnected from power supply.
Appliance is disconnected from water supply.
4.11.1 Removing outer door
Just remove the screws which are described in the following steps.
1. Open door.
2. Remove four screws.
3.
Secure the door by holding it on one side.
Remove two screws.
4.11.2 Installing outer door
Notice
Cables which are incorrectly positioned or not secured!
Damage to cabling
▶
Position the cables and secure in place with adhesive tape.
Repair
To Next Page
Loading...
