Replacing the Hard Drive19
19.2 Installing a New Hard Drive
CAUTION
Make sure that the system is OFF and the power adapter is disconnected before removing/installing a hard drive.
To install a new hard drive:
1. Insert the 2 hard drive screws closest to the SATA and power ports on the hard drive and tight-
en them half way.
2. Power off the system, and unplug all cabling from the system.
3. Turn the recorder over. Remove the bottom panel screws (6×).
#LX400111; r. 1.0/55872/56018; en-US 93
To Next Page
Loading...
Need help?
General